Which electric drill to choose: rating of the TOP 10 best models of 2021

The article discusses the best models of electric drills. The advantages and disadvantages of each model are given.

In the economy of each master should be an electric drill. With it, at any time you can drill a hole in the wall to hang a shelf or a picture.

Offered on the market dozens of models of drills. They vary in price and in many different parameters.. Understanding which company to choose is quite difficult.

Therefore, in such a situation, the rating of the best drills will help. Below is a top electric drill with characteristics, advantages and disadvantages.

The rating will help you choose the most suitable option.

What features of electric drills to pay attention to when choosing?

A modern drill allows you to perform a huge amount of work. With it, it is possible to drill holes in wood, metal, brick and concrete.

Note! The use of special nozzles allows you to expand the scope of use: stir solutions, perform grinding work.

When buying an electric drill, you need to pay attention to the following parameters:

Rotation speed adjustment.
With it, it is possible to smoothly change the speed of rotation.
In this case, it is possible to use a drill as a screwdriver.
Reverse.
It allows you to change the direction of rotation, which is especially in demand if the drill is used as a screwdriver.
Depth gauge.
It allows you to control the drilling depth.
Power.
For domestic purposes, a power of 50 watts will be enough.
The tool must be easy to use.
Special non-slip pads will increase safety during operation.
Additional functions.
They make the job much easier. For example, the function of fixing the "start" button allows you to reduce the stress on the hand.

Best cordless drills

The use of cordless drills is justified when working away from the mains, or in cases where the wire interferes with full-fledged work.

The following is a rating of the best models that run on battery power.

BOSCH GBM 10 RE 2009 600W

The model has a keyless chuck. It allows you to quickly change equipment. The tool allows you to make holes in steel with a diameter of up to 10 mm.

This drill is compact and light weight. This allows you to work comfortably.

The BOSCH GBM 10 REE drill saves a lot of time.

Quick-release chuck allows you to quickly change nozzles.

The tool has a special clip for attaching it to a belt, which is an additional advantage.

The presence of a lock button makes long-term work more convenient. If the tool is stuck in the material, it can be easily removed due to the reverse function.

The soft grip on the handle provides a secure grip and comfortable operation. In addition, the tool is equipped with an electronic speed control.

Specifications:

type: impact drill;
chuck type: keyless;
number of work speeds: 1;
food: from a network;
Max. number of beats per minute: 25000 beats / min;
Max. idle speed: 3000 rpm;

Advantages

Ease of use;
high power;
availability of additional functions;
affordable price.

Flaws

short cord;
high noise level;
no storage case.

Makita 6413 450W

Using a drill of this model, it is possible to make holes, and if equipped, it is possible to work with fasteners.

The motor power of this tool is 450W. With the help of electronics, it is possible to regulate the number of revolutions.

An accelerator function is provided. It lies in the fact that the stronger the pressure, the higher the number of revolutions.

Rubberized grip on the handle securely fixes the hand during operation.

The case has holes for cooling the internal elements of the tool, so the drill does not get very hot.

In addition, the drill has a reverse function. It allows you to easily deal with a drill that is stuck in the material, as well as work with fastening tools.

Thanks to the reverse function, you can easily deal with a drill stuck in the material or work with fasteners. The button of fixation of the included state will provide convenient and duration work.

Specifications:

type: impact drill;
chuck type: keyless;
number of work speeds: 2;
food: from a network;
Max. number of beats per minute: 58000 beats / min;
Max. idle speed: 2900 rpm;

Advantages

thoughtful ergonomics;
convenient cartridge;
long and soft cord;
high quality.

Flaws

high price;
high noise level;
no storage case.

ZUBR ZDM-820 RM 820 W

This drill model has a unique design. Tool power 820 W. The torque is 50 Nm.

The tool has one speed, and the maximum number of revolutions reaches 650 in one minute. The kit includes one cam-type chuck.

The maximum drilling diameter ranges from 13 mm to 36 mm.

This model can work with wood and steel. A reverse function is provided.

With it, it is possible to easily release the drill if it is stuck in the material. In addition, an additional handle is provided in the kit.

Specifications:

type: hammerless drill;
cartridge type: key;
number of work speeds: 1;
food: from a network;
Max. idle speed: 650 rpm

Advantages

thoughtful ergonomics;
affordable price;
long and soft cord;
high quality.

Flaws

small cartridge;
high noise level;
great weight.

Makita DP4011 720W

The drill of this brand is intended for making holes of large diameter in wood, metal, plastic and other materials.

The tool has medium speed and high torque. The power of the drill is 720 watts. The tool has two speeds.

In addition, it has a reverse function. With it, it is possible to tighten and unscrew the fasteners.

Work on Makita DP4011 is more comfortable due to the fact that it has a keyless chuck and a built-in drilling depth limiter.

Using the speed switch, which is located on the top of the case, you can adjust the speed mode.

The handle of the tool is made in an organic form. It makes work more convenient for the user due to rubber inserts.

Specifications:

type: impact drill;
cartridge type: key;
number of work speeds: 2;
food: from a network;
Max. idle speed: 2800 rpm

Advantages

thoughtful ergonomics;
lack of vibration;
long and soft cord;
light weight.

Flaws

small cartridge;
high noise level;
heating during operation.

Bort BSM-540 450W

A feature of this model is its low weight. It is 1.3 kg.

The drill also has compact dimensions. Due to this, it is possible to work with the tool in places with poor traffic.

The power of the tool is 450 watts. Due to this, it is possible to make holes with a diameter of up to 20 mm in wood and up to 10 mm in metal.

Reverse option and keyless chuck available. In addition, the tool has a strap for which it is possible to hang it.

Specifications:

type: impact drill;
chuck type: keyless;
number of work speeds: 1;
food: from a network;
Max. idle speed: 4000 rpm.

Advantages

thoughtful ergonomics;
lack of vibration;
long and soft cord;
light weight.

Flaws

small cartridge;
high noise level;
heating during operation.

The best impact drills

Hammer drill suitable for screwing and unscrewing fasteners and making small/medium holes, preferably in wood, metal, tile and plastic. The following is a list of the best impact drills.

Makita HP1640 680W

The HP1640 model has two modes, weighs 1.8 kg and has a power of 680 watts. The tool can be used in drilling mode and in hammer drilling mode.

The second mode is activated using a mechanism that makes 44,800 beats per minute.

This mechanism allows you to get holes in concrete with a diameter of 16 mm, in steel - 13 mm, in wood - 30 mm.

The tool has the ability to adjust the engine speed. The long term of use is ensured by the design of the tool on a ball bearing.

Other features of the model:

rubberized handle. With it, it is possible to make a complete revolution around the body of the drill;
the presence of a button for fixing the switch;
reverse mode. It will provide comfortable work and full control over the drill.

Specifications:

type: impact drill;
chuck type: keyless;
number of work speeds: 1;
food: from a network;
Max. idle speed: 2800 rpm

Advantages

high power;
lack of vibration;
high build quality;
light weight.

Flaws

key teeth slip when the chuck is tightened strongly
short cord;
no case included.

BOSCH GSB 13 RE (0 601 217 102) 600 W

This model of a drill is intended for construction works. The tool has two modes of operation. This allows it to perform a variety of functions.

The power of the drill is 600 watts. This allows you to quickly drill through steel, brick and wood surfaces.

The tool of this model can also be used as a screwdriver.

In addition to the wide functionality of the BOSCH GSB 13 RE, it has comfortable handles and a quick-clamping metal chuck.

Using this tool is very simple. There is also a reverse option, which will allow you to change direction and wrap screws.

Specifications:

type: impact drill;
cartridge type: key;
number of work speeds: 2;
food: from a network;
Max. idle speed: 2800 rpm

Advantages

high power;
Ease of use;
not loud engine operation;
light weight.

Flaws

small cartridge;
high price;
heating during operation.

Interskol DU-22/1200ERP2 1200 W

The drill of this model has an impact mode. It is used to create holes in surfaces such as brick, tile, ceramics. Also, the tool can be used for general construction work.

The model is equipped with an electric motor with a power of 1200 watts. Due to this, several speeds, reverse and drilling depth limitation are provided.

With the help of Interskol DU-22/1200ERP2 it is possible to make different holes in any materials.

The key chuck is used to secure the rig. It supports nozzles with a diameter of 16 mm.

The largest hole size that the tool can create is 50 mm.

The drill has a compact size and light weight. Handles are conveniently located. They provide comfort even during long work. The delivery, together with the tool, includes: a handle, a key for the chuck and a limiter.

Specifications:

type: impact drill;
cartridge type: key;
number of work speeds: 2;
food: from a network;
Max. idle speed: 2000 rpm

Advantages

high power;
Ease of use;
not loud engine operation;
light weight.

Flaws

weak attachment of the additional handle;
high price;
short cord.

DEKO DKID600W (BZP) 600 W black

This network model allows you to make holes in various materials: wood, steel, brick, lightweight concrete, etc. There is a wide range of speed adjustment.

The drill in question is light in weight and compact in size. There is a function of drilling with impact.

It allows you to make holes in brick and lightweight concrete. In addition, this model has the following features:

electronic adjustment of the speed limit using a wheel;
the ability to change the speed using a special switch;
tool life is extended by impact gears made of chrome alloy;
the presence of a reverse allows you to use the tool as a screwdriver.
fixing the switch in the on position allows you to make the work most convenient;
drilling depth limiter allows you to drill exactly to a given depth;
an additional handle with a mount for installing a depth gauge is provided.

Specifications:

type: impact drill;
chuck type: keyless;
number of work speeds: 1;
food: from a network;
Max. idle speed: 3000 rpm

Advantages

high power;
Ease of use;
affordable price;
light weight.

Flaws

the smell of plastic;
high noise level;
heating during operation.

Makita M0801K 500W

This model is light, comfortable, has one speed and medium power. The tool is capable of making holes up to 13 mm.

The power of the tool is sufficient for rapid drilling of structural steels, wood of any species, ceramics and polymeric materials.

In shock mode, the drill copes with drilling concrete, brick, natural / artificial stone.

There is a reverse switch, an electronic speed controller.

Specifications:

type: impact drill;
cartridge type: key;
number of work speeds: 2;
food: from a network;
Max. idle speed: 3200 rpm.

Advantages

high quality workmanship;
Ease of use;
affordable price;
light weight.

Flaws

the smell of plastic;
low power;
heating during operation.

Reviews

Customer Reviews

{{ reviewsOverall }} / 5 Grade (3 total valued)

Overall score

Total reviews:

Checked

{{{ review.rating_title}}}

{{{review.rating_comment | nl2br}}}

Review responses ({{review.rating_replies.length}})

This review has no replies yet.

Useful video

From this video you will learn how to choose a corded drill:

Conclusion

Thus, the following conclusions can be drawn:

There are many types of electric drills on the market.
Each model has advantages and disadvantages.
Before choosing a particular model, it is important to determine the purposes for which it is purchased.

Reviews Ratings